< ControlSeries

ECT-E2

ECT-E2

Application

  • EASYCON Control Series wireless wide range  extension feature is your best solution for tough installation environment, and saving system installation time.
  • EASYCON Control Series no limited system expandability is suitable from small to large scale of the automatically control application requirement, such as smart home, smart office, intelligent building, factory, campus, dairy and agriculture, etc.
  • EASYCON Relay-IO (ECT-E2) with plenty Relay and I/O terminals is used as wireless extension modules and also can cover the shortage of these function ports.

 

FEATURES


  • Wireless Extension Module Design ─ Using LoRa Technology offers a very compelling mix of long range, low power consumption and secure data transmission between the Main Server and eModules. The transmission distance could be up to2~5KM in dense urban*, and up to 10~15 KM theoretically in suburban*. eModule design make the system easily scalable to support a wide range of applications for different requirement.
  • EASY Config is the System Program Generator ─ With user friendly interface and step by step simple process to make the system configuration and generate the  control system program.
  • EASY App on Smart Device ─ System can be controlled by smart devices, such as smart phone, iPad, etc. Using smart device App to create user defined Zones, Scenes, Sensor Activated Events, Scheduling, and Equipment Controller.
  • EASY Centre for Control and Monitoring on PC ─ Including all the function of EASY App, and support user defined graphic control and monitoring interface. EASY Centre also functions as a synchronization center for different smart devices running EASY App.
  • Plenty Relay and I/O Ports Supported ─ Including 6 Relay Ports, 6 Digital Input Ports, 6 Digital Output Ports, 3 Analogue Input Ports and 2 Serial Ports
  • Provide Both 12 VDC and 24 VDC Power Input

 

specification


ECT-E2

  • 12 VDC, 24 VDC
  • 1000 mA @ 12 VDC, 500 mA @ 24 VDC
  • 6 W (Max.)
  • 12 VDC Input ─ 2.0 mm Center Pin DC Power Jack
  • 24 VDC Input ─ 3.5 mm Phoenix with retaining screws
  • POE ─ RJ45
  • 2 x 3-position 3.5 mm phoenix connector, baud rate 9600
  • 1 x 2-position 3.5 mm phoenix connector, baud rate 9600
  • 6 x 2-position 3.5 mm phoenix connector
  • 4 Single-Pole, Single-Throw relays
  • 4 x 2-position 3.5 mm phoenix connector
  • Each relay can switch up to 28 VDC @ 10 A
  • Each relay is independently controlled
  • 4 DO ports with 1 common Ground port, 1x 2-position +1x 3-position 3.5 mm phoenix connector
  • 10-12 VDC / 50mA Output
  • 8 x 2-position 3.5 mm phoenix connector
  • With photo coupler protected
  • 5-24VDC
  • 3 x 2-position 3.5 mm phoenix connector
  • 12-bit ADC resolution
  • Input range 0-12V
  • 1 x 2-position 3.5 mm phoenix connector
  • With photo coupler protected
  • 6 Dim ports with 1 common Ground port, 2x 2-position +1x 3-position 3.5 mm phoenix connector
  • Support 0-10V dimmable lighting fixtures
  • 2 C.T. ports with 1 common Ground port of DO, 1x 2-position 3.5 mm phoenix connector
  • Support 1 white light (5500~6000K) and 1 warm light (3000K) 0-10V dimmable lighting fixtures to adjust the light color temperature.
  • 1 xRJ-45, support 10/100M LAN
  • 6xSerial (RS232,RS485), 6xIR, 4xRelay, 4xDO, 8xDI, 3xAI, 1xEMP, 6xDIM, 2xC.T., 1xLAN, 1xRF
  • 433MHz (ECN-L4), 868MHz (ECN-L8), 915MHz (ECN-L9)
  • LoRa
  • +2 dBm ~ +16dBm (contact power)
  • Typical -122 dBm (SF9 for frequency high side & bandwidth setting at 500KHz)
  • Metal with black/silver horizontal satin matte finish
  • 279mm x 174.6mmx 72.4mm
  • 500g
  • Power Adapter, Power Cord , Antenna