< ControlSeries

ECT-E3

ECT-E3

Application

  • EASYCON Control Series wireless wide range extension feature is your best solution for tough installation environment, and saving system installation time.
  • EASYCON Control Series no limited system expandability is suitable from small to large scale of the automatically control application requirement, such as smart home, smart office, intelligent building, factory, campus, dairy and agriculture, etc.
  • EASYCONLighting  (ECT-E3) with plenty Lighting control ports is used as wireless extension modules and also can cover the shortage of lighting control or other I/O function ports.

 

FEATURES


  • Wireless Extension Module Design ─ Using LoRa Technology offers a very compelling mix of long range, low power consumption and secure data transmission between the Main Server and eModules. The transmission distance could be up to2~5KM in dense urban*, and up to 10~15 KM theoretically in suburban*. eModule design make the system easily scalable to support a wide range of applications for different requirement.
  • EASY Config is the System Program Generator ─ With user friendly interface and step by step simple process to make the system configuration and generate the control system program.
  • EASY App on Smart Device ─ System can be controlled by smart devices, such as smart phone, iPad, etc. Using smart device App to create user defined Zones, Scenes, Sensor Activated Events, Scheduling, and Equipment Controller.
  • EASY Centre for Control and Monitoring on PC ─ Including all the function of EASY App, and support user defined graphic control and monitoring interface. EASY Centre also functions as a synchronization center for different smart devices running EASY App.
  • Plenty Lighting Control Port ─ Including 3 Relay Ports for On-Off type lighting loop, and 4 Dimmer Ports for 0-10 dimmable lighting fixtures.
  • IR Input Receiver ─ Used to learn the IR control code from IR remote controller.
  • Provide Both 12 VDC and 24 VDC Power Input

 

specification


ECT-E3

  • 12 VDC, 24 VDC
  • 1000 mA @ 12 VDC, 500 mA @ 24 VDC
  • 4.5 W (Max.)
  • 12 VDC Input ─ 2.0 mm Center Pin DC Power Jack
  • 24 VDC Input ─ 3.5 mm Phoenix with retaining screws
  • 2 RS-232, 1x DB9 mail connector and 1x 3.5 mm phoenix connector ,baud rate 9600
  • 1 RS-485, 3.5 mm phoenix connector, baud rate 9600
  • 3 Relays with COM, NO, NC terminals, 3.5 mm phoenix connector
  • Each relay can switch up to 28 VDC @ 10 A
  • Each relay is independently controlled
  • 3 DO ports , 3.5 mm phoenix connector
  • 10-12 VDC / 50mA Output
  • 3 DI ports, 3.5 mm phoenix connector
  • With photo couple protected
  • 5-24VDC
  • 1 AI ports, 3.5 mm phoenix connector
  • 12-bit ADC resolution
  • Input range 0-12V
  • 6x Serial (2x RS232,1X RS485), 3x Relay, 3x DO, 3x DI,
  • , 1x AI, 4x IR-Out, 4x Dimmer, 1x IR-In, 1x Power
  • 433MHz (ECT-E3L4), 868MHz (ECT-E3L8), 915MHz (ECT-E3L9)
  • LoRa
  • +2 dBm ~ +16dBm (contact power)
  • Typical -122 dBm (SF9 for frequency high side & bandwidth setting at 500KHz)
  • Metal enclosure with black matte finish
  • 181.0mm (211.4 with ears) x 89.2mm x 38.0mm
  • 476g
  • Power Adapter, Power Cord , Antenna