GES-BINIT-1900
Motherboard
Intel® Celeron J1900, N2840 Baytrail-I/M/D Series
Features
Integrated Intel® Celeron J1900 2.0GHz Quad-Core Processor, Compatible with
Intel® Baytrail-I/M/D Series CPUs
1x SODIMM Slot, Supports Single-Channel 1600/1333MHz DDR3L/1.35V Memory,
Up to 8GB
VGA and HDMI Dual Displays, or Dual HDMI Displays
2x GbT
1x Mini-PCIe (WIFI/4G) and 1x mSATA
1x USB 3.0 Port and 5x USB 2.0 Ports
2x RS232 (Optional 2 RS485), with Optional Support for 4 Serial Ports
Fanless Design, Can Be Made into A Sealed Unit for Dust and Moisture Resistance
Supports a Wide Temperature Range of -20 to 60 Degrees Celsius
AT and ATX Mode Switching, 12-19V DC Power Supply
Specification
| CPU | Integrated Intel® Celeron J1900/2.0GHz Quad-Core Processor TDP 10W Compatible with Intel® Baytrail-I/M/D Series CPUs |
| Memory | 1x SO-DIMM Slot, Supports Single-Channel 1600/1333MHz DDR3L/1.35V Memory, Maximum Support of 8GB |
| Graphics | Integrated Intel® UHD Graphics 600 1x VGA Interface and 1x HDMI Interface, or 2x HDMI Display Interfaces Supports VGA and HDMI Synchronous/Asynchronous Display |
| Ethernet | 2x Realtek RTL8111H Gigabit Network Cards, Supports Wake-on-LAN/PXE |
| Storage | 1x 7* Pin SATA 3.0, Transfer Rate up to 6Gbps 1x mSATA 3.0 Slot (Long Card) |
| Audio | ALC897 7.1-Channel High-Definition Audio Controller, Supports MIC/Line-Out |
| Expansion Slot | 1x Mini-PCIe Slot (Supports Both Half-Length and Full-Length Cards), Supports WIFI/4G Modules |
| Back Panel I/O | 1x HDMI 1.2 Display Interface 1x VGA Display Interface (Optional with the Second HDMI 1.2 Interface, Default Is VGA) 1x USB 3.0 Interface 1x USB 2.0 Interface 2x RJ-45 Gigabit Network Interfaces 1x 12V DC Power Input Interface |
| Front I/O | 4x USB 2.0 Interfaces 1x Line Out and MIC Combo Interface 2x DB9 RS232 Serial Ports (Default RS232, COM1 and COM2 Can Support RS485 Via Jumper) 1x Hard Drive Indicator Light 1x Power Switch Button with LED |
| Internal I/O | 1x USB 2.0 Interface 1* 4-Pin (USB2.0 Function Is Invalid When Supporting 4G, Optional) 2x COM Interfaces 2* 5-Pin (Same Signal as Front I/O Interfaces, JCOM1~4 Optional) 1* 4-Pin Power Input Interface 1x Hard Drive Power Interface 1x Front Panel Switch Button and Indicator Light Interface 2* 5-Pin |
| Fan Connector | Back-Mounted CPU Fanless Cooling |
| GPIO | Supports 4 GPIO Inputs/Outputs |
| BIOS | 64Mb Flash ROM |
| Watchdog | Supports Hardware Reset Function (256 Levels, 0~255 Seconds) |
| Support OS | Windows 7/10/Linux |
| Power Supply | Supports DC 12V |
Environment Compliance
| Operating Temp. | -20°C ~60°C |
| Storage Temp. | -20°C ~ 70°C |
| Humidity | 5% to 95%RH, Non-Condensing |
| Dimension | 120* 120mm |
